The first method is the biscuit method, which is one of the best ways to join the shelves, but requires the right machinery. If additional support is needed to keep the shelves from sagging, install a center bracket under each shelf.
Wooden closet shelves can also be a great addition in hall closets or linen closets.
How to support closet shelves. Repeat on the opposite end (image 1). If you're planning to add wood closet shelving into an. The current closet rod was 8’ long and since it didn’t have a.
Once your shelves are inside the closet, start adding your 1×2 supports. Another similar option would be to install a thicker back panel and rout a dado for the entire back of the shelf to sit in. Screwing the shelves into the back is a great start and will provide a significant amount of support along the length of the shelf.
We also used mdf because it accepts paint so well and we could make it. I added them all equal distance apart, so a little math was involved. If that’s not an option you could simply glue in a ledger strip under each shelf.
Use the closet rod and top shelf center support to mark the locations for the closet rod end brackets. The cleats are nailed to the studs with the top flush with the lines. You will need a biscuit machine to cuts slots in the leading edges of the shelf boards.
Another option to increase shelf support is to glue and nail a 1”x 2” strip to the front of each shelf. Always measure your space before installing. For longer or wider shelves, it’s smart to either run a solid wood nosing on mdf to support the front, or use birch plywood, which will span a little further without sagging.
Another option to increase shelf support is to glue and nail a 1”x 2” strip to the front of each shelf. The plywood strips are attached on edge, or on their sides, providing the most rigidity. If you intend to place heavy object on the shelves, instead of marking every three feet, mark every two feet.
The cleats provide stability and support the weight of. Set the shelves in place on top of the cleats. Support braces will give your shelf extra support to make it steady.
What screws to use for closet shelves? Closet shelf supports are typically wooden cleats attached to the wall just below the shelf. We chose to just attach the supports to the side walls since the shelves aren't too large.
If you are building straightforward shelves, you also need to add wood supports along the back wall of the closet. Do shelves need to go into studs? Simply cut another 1’x2′ board the length of your shelf minus.
I cut 1 1/2″ strips of plywood and secured three strips to each shelf, including the top and bottom of the bookshelf. Start by figuring out exactly where you want your shelves. 😉 i used my nail gun to attach all the supports, but you might want to consider adding a few.
Using your level, draw a straight line with a pencil so you know where to nail your first support. Our closet shelves will use a simple cleat system to hold the shelf boards. If your shelf is between 8 and 12 inches in depth (from front of shelf to back wall), you will need a minimum of 2 biscuits.
How to make the closet shelves locate where each shelf will be placed.