Ready to get your sick stopper removed? Slide the nut back along the pivot rod.
The other side of the detached rod should be connected to a pivot nut that you have to unscrew.
How to remove sink stopper with pivot rod. If it is just spinning however, it may be all the way off the threads and you just need to pull it back. A broken pivot rod will not lower the stopper and must be replaced. Find the nut on the drainpipe surrounding the pivot rod.
Now that the horizontal rod and pivot nut have been removed, you should be able to remove the sink stopper by hand. Slide the retaining nut and washer off the original pivot rod. How to remove sink stopper without pivot rod.
Now that the stopper is free you only need to lift it off from the sink drain. The clevis screw secures the clevis strap, which connects the lift rod and pivot rod to the lift rod. Raise the stopper to its open position and pull it out of the drain.
Look beneath the sink and behind the drain to find the pivot rod. First, you should try to remove the sink stopper by hand because many of the sink stoppers pull out only by turning slightly. The pivot rod then threads through the tail of the drain stopper.
Once this is done, assemble everything back into place. Unscrew the retaining nut that holds the pivot rod inside the drain. In other cases, you’ll need to head beneath your sink, unclip the plunger rod, and remove the pivot nut before you can wiggle out your sink stopper.
The lift rod is usually behind the sink and is what you pull to trigger the mechanism. How to remove bathroom sink stoppers. On the other end, the spring clip connects the clevis strap to the pivot rod, which is what pushes the stopper up or down.
Now that the stopper is free you only need to lift it off from the sink drain. Pull the pivot rod out of the drain. To clean the stopper, you must disconnect it from the sink and pull it from the drain.
If the horizontal pivot rod won’t move, the retaining nut is too tight. If the stopper does not lift out, turn it counterclockwise to free it from the pivot rod that it’s attached to. If you fail to remove the sink stopper by hand, you should clean the garbage that gathered under the stopper.
Do not force the stopper if it. If you cannot do it with your hands, use a pair of pliers. Remove the rubber stopper from the sink from the drainpipe by lifting it out.
The stopper may be covered in build up and gunk, so. This is the moment when you take the bucket and place it under the sink. Look beneath the sink and behind the drain to find the pivot rod.
Roll up your sleeves and follow these easy steps. How do you replace a sink drain rod? You might need to shake it a little to get it loose, it will also probably help to detach the rod that goes from the sink stopper pull to that nut since it will get in the way.
It is attached to a rod that pivots in the middle of the pipe. Pull the rod out to detach it from the stopper plug. Unscrew the retaining nut that holds the pivot rod inside the drain.
Pull the pivot rod out of the drain. Look beneath the sink and behind the drain to find the pivot rod. In case the water comes running down when the nut is unscrewed, this will save you a lot of cleaning work.
Then pull the stopper out. Some sink stoppers allow you to remove them by simply pulling up and twisting. Discover answers for +22 related questions.
By this, you will get more space to work. A broken pivot rod will not lower the stopper and must be replaced. Take a close look at the stopper for signs of damage or warping.