The 0350 (89) quad close trap seal size installs in the throat of smith adjustable strainers. Floor drain or similar traps directly connected to the drainage system and subject to infrequent use shall be protected with a trap seal primer, except where not deemed necessary for safety or sanitation by the authority having jurisdiction.
Opens easily for full water flow, then closes to protect the trap seal.
Floor drain trap seal protection device. This product should not be removed from the packaging until it is to be installed. The barrier type floor drain trap seal protection deviceis to be used in addition to the existing trap seal for the purpose of mitigating trap seal loss due to evaporation and to protect against the entry of vermin into the habitable space. Device shall remain normally closed when not in use, and open easily to allow free flow of water into the drain.
Installation should be conducted in accordance with all local codes. When evaporation occurs, prevents escape of sewer gas. When water runs into the floor drain, the insert allows the water to pass and then closes to significantly reduce evaporation of the trap seal.
Sureseal can be used with 2, 3, and 4 floor drains and 31/2 and 4 floor drain strainers to trap odors, sureseal can be easily retrofitted to older drains, as its variety of designs ensure compatibility with all other drain types. All sizes meets or exceeds these flow rates. This product fits into a floor drain that comply with ansi/asme al 12.6.3 to provide a barrier type method to prevent evaporation of the trap contents and the escape of gases, while providing appropriate
Trap seal primers shall be accessible for maintenance. Josam offers a waterless trap seal for floor drains. Floor drain trap seal protection device designed to prevent evaporation.
See reverse side of submittal for illustration. Barrier type floor drain trap seal protection devices listed as conforming to the asse 1072 product standard. Jump to full code chapter.
Trapshield™ protects water traps in floor drains from evaporation to prevent sewer gas and odors from entering the building. Reduces trap evaporation by 95%. Type floor drain trap seal protection devices.
Installation should be conducted in accordance with all local codes. Required flow rates per asse standard #1072, section i. Nfully automatic, no adjustments needed.
Certified by asse to 1072. Traps for floor drains shall be fitted with a trap primer or shall be of the deep seal design. The devices shall be installed.
Sureseal waterless inline drain trap seal, 4 contractor 24 pk. The membrane is sensitive enough to open from the weight of just four ounces of water, but strong enough to stay closed and sealed to minimize evaporation and eliminate sewer gas odour. Listed with asse, iapmo, and icc.
Trap seal primer valves shall connect to the trap at a point above the level of the trap seal. Can be easily retrofitted into existing floor drains. The latest trap seal protection device is for floor drains only and utilizes a specially designed and tested insert below the floor drain strainer plate.
This barrier type floor drain trap seal protection device is not for use as a primary trap seal. Device is engineered to comply Reduces odors from emitting out of drain.
Zurn z1072 zshield tm barrier trap seal device for use with floor drains to minimize trap evaporation. All sections of the standard were successfully passed. Floor drain trap seal protection devices iapmo oceana pty ltd is part of the iapmo group, an international plumbing industry based association that tests and certifies products and develops codes and standards that protect more than half the world’s population.
Traps shall have a liquid seal not less than 2 inches (51 mm) and not more than 4 inches (102 mm).